DriTac New & Improved MCS 7000

Premium “Green” Concrete Moisture Control System

DriTac New and Improved MCS 7000 Premium ‘‘Green’’ Concrete Moisture Control System reduces the transmission rate of moisture vapor within any concrete subfloor to levels accepted by most flooring manufacturers. The New and Improved MCS 7000 system consists of a two-component epoxy, which is mixed together to form a coating that is applied to the surface of the concrete subfloor.

Application Information

Measure and mark out area to be covered. Do not apply DriTac 7000 Concrete Moisture Control System when the temperature is below 65*F. Do not apply DriTac 7000 if temperatures exceed 100*F as this will result in the product curing too quickly and possibly not bonding to the concrete. Apply DriTac 7000 with a 3/8” nap roller, squeegee or a 1/16” x 1/16” x 1/16” notched trowel, immediately after mixing. Maximum recommended coverage is 300-350 sq. ft per mixed unit. Avoid excess pressure on the roller so that an adequate amount of material will be distributed onto the concrete. To even out coverage, back rolling is recommended. Do not extend the coverage, as this will void the warranty.


• Reduces Moisture Vapor Transmission –

  up to 25 lbs./100% RH

• For Use with Hardwood & Resilient Flooring Installations

• Helps Contribute to LEED Credits

• Recommended Coverage is Approx. 300-350 sq. ft. mixed unit

• Allows Same Day Installations – 6-Hour Cure Time!

• Enhanced Performance Characterics – Easy to Mix and Apply!

• Zero Solvents

• Will Not Promote the Growth of Mold

• Easy to Clean Up When Wet

• Enhanced Warranty

Please follow and like us:


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.