Sale!

GreenForce Adhesive and Moisture Control Membrane

$129.99 $119.99

Bostik GreenForce™ is a high performance hardwood flooring adhesive and moisture control membrane all in one. With Bostik’s breakthrough AXIOS® Tri-Linking™ Polymer Technology, GreenForce™ maintains the superior long term durability and moisture protection properties of high-end urethane hardwood floor adhesive, but it is easier to spread and clean off of prefinished flooring, even after full cure.

Description

GreenForce™ is a Flooring Adhesive and Moisture Control Membrane in One

GreenForce™ hardwood flooring adhesive has extremely low moisture vapor permeability and is not adversely affected by moisture. As a result, costly and time consuming concrete moisture testing is not required when the slab is properly prepared, dry to the touch and fully cured.

Use GreenForce™ in Applications that Require an Anti-fracture, Antimicrobial Hardwood Flooring Adhesive

The elastomeric characteristics of GreenForce™ establish an anti-fracture membrane that can bridge cracks up to 1/8" (3mm), which can occur in the substrate prior to or after installation. This superior elasticity allows GreenForce™ adhesive to move with the floor as it expands and contracts with changes in humidity and temperature over its lifetime.

GreenForce™ also comes with Bostik’s BLOCKADE® antimicrobial protection, which inhibits the growth of bacteria, mold or mildew on the surface of the cured membrane. The cured membrane resists stains caused by mold.

GreenForce™ adheres to all the most common substrates used in hardwood flooring installation

Bostik GreenForce™ high performance adhesive may be used with all engineered hardwood flooring, solid hardwood flooring, bamboo, cork, and parquet. GreenForce™ has no restrictions on board width or length. It may be used over all properly prepared substrates common to hardwood flooring installations including concrete, plywood, well-bonded vinyl/VCT and ceramic tile, cement backer board, gypsum underlayments (dry, above grade), cement patch/underlayments, radiant-heat flooring, and properly prepared terrazzo. GreenForce™ adhesive can also be used to install plywood as described, as well as ceramic tile, marble, and stone inlays for light commercial and/or residential applications.

Where to UseSubstratesMaterials
ResidentialConcreteSolid hardwood flooring
Offices and light commercialPlywoodEngineered hardwood flooring
Heavy commercialOSBBamboo flooring
OfficesWell-bonded vinylCork flooring
HospitalTerrazzoParquet flooring
Ceramic tilePlywood
Cement backer boardCeramic tile, marble, and stone inlays (in residential or light commercial only)
Gypsum underlayments (dry, above-grade)
Cement patch/underlayments
Please follow and like us:

Additional information

Weight57 lbs
Dimensions12 × 12 × 12 cm